1. Device-positioning sticker

If the Pico RRU is installed in a concealed place, such as inside the ceiling, paste a positioning sticker to the ceiling under the position where the device is installed for easy maintenance and search. The sticker should be pasted at a ceiling corner.

2. Label Specifications

• The serial numbers of the BBU, MAU, PB, and Pico RRU must be the same as those on the design drawings.

• The serial number of each PB must be written with a whiteboard pen or labeled on the front panel of the PB. The serial number must be the same as that on the design drawing, for example, PB-1.

3. The format of the Label Content

• First line: P1 (carrier)_P2 (device model-serial number)_P3 (port number of the device)

• The second line:P4 (installation location: building+floor+location)