Subject initiator:dvalente2357       Replies:2       Published on:2019-02-13

Legends: ZTE engineer:Administrator
Subject:  trunk configuration in OLT C300
Common member
dvalente2357

Common member
Score::23
Registered on:2019-01-26
trunk configuration in OLT C300 (Published on:2/13/2019 4:20:17 AM)

Hi

Please anybody know how to configure trunk in gpon in OLT C300

Ive tried this config and seem to work

interface gpon-onu_1/2/1:3
  sn-bind enable sn
  tcont 1 name T1 profile UL20M
  tcont 1 gap mode2
  gemport 1 tcont 1
  gemport 1 traffic-limit downstream DL20M 
  switchport mode trunk vport 1
  service-port 1 vport 1 user-vlan 229 vlan 229 
  service-port 2 vport 1 user-vlan 230 vlan 230

pon-onu-mng gpon-onu_1/2/1:3
  service HSI gemport 1 cos 0 vlan 229-230
  vlan port eth_0/1 mode transparent

Is it correct? In OLTC320 we have used this configuration

interface gpon-onu_1/1/3:4
  tcont 1 name T1 profile UL10M
  tcont 1 gap mode2
  gemport 1 unicast tcont 1 dir both
  gemport 1 traffic-limit downstream DL10M 
  switchport mode hybrid vport 1
  switchport vlan 872,875  tag vport 1

pon-onu-mng gpon-onu_1/1/3:4
  service HSI type internet gemport 1 cos 0 vlan 872,875
  vlan port eth_0/1 mode transparent

But In OLTC300 I cant configure the command  switchport vlan xx  tag vport 1, is it correct the configuration I put first.


Thanks in advance





Common member
dvalente2357

Common member
Score::23
Registered on:2019-01-26
Reply:trunk configuration in OLT C300 (Published on:2/15/2019 5:30:51 AM)
Ok Thanks you very much



Administrator
10047664

Administrator
Score::4257
Registered on:2009-07-14
Reply:trunk configuration in OLT C300 (Published on:2/13/2019 8:56:53 AM)

correct

Both can be used


 

 






Total: 2 Records Page: 1 /1 First Prev Next Last    Records /Page(s)  
 
Subject:  trunk configuration in OLT C300
 Attachment  
 Reply Content