Subject:  ZXJ10 SS7 Quasi-Associated Mode
besttel Common member Score::11 Registered on:2012-03-28	ZXJ10 SS7 Quasi-Associated Mode (Published on:3/28/2012 9:30:51 PM)
	Hi all! We have ZTE ZXJ10 V10.0.03.03.Eu.4. This version PBX supports SS7 Quasi-Associated Mode? See attachment screenshot. Maybe you could show where in the documentation, this mode is descripts? I can't configured my E1 PCM's. I need two signal link to different DPC (STP-1, STP-2) and voice TS go to third DPC Download ss7_stp2.jpg

GuoNaiChao ZTE engineer Score::22 Registered on:2005-06-02

Reply:ZXJ10 SS7 Quasi-Associated Mode (Published on:3/30/2012 9:24:17 AM)

Now supposing STP1 and STP2 are 2 signal DPC, and DTE-B is your voice DPC. So you need first add 3 adjacent office first, STPKA and STPKB are ASSOCIATED, and DTE-B will be Q-associated office. Then click data-ss7- ccs mtp data menu, configure your SS7 data. Now you will create 2 singnal link,I.E link STP1 point to office STP1 DPC and link STP2 point to office STP2 DPC. Then create 2 signal link group, one include link STP1 and another group include link STP2.  Then when add link route, you can assign above 2 group in this route as link group 1 and link group2. Then click office ID tabpage to create signal office ,now this office ID will be the office that connect to your voice office DPC and Primary route will be the route just now u create above(signal point to STP1 and STP2) Then in pcm system, you add the PCM system into your VOICE office. Then create the trunk group by clicking data-basic-trunk, and the adjacent office parameter in this trunk group still point to your VOICE office. Then now the voice will be go to your VOICE office and Signal will be transferred by your STP1 and STP2. Download SS7.doc