Subject initiator:RTEdurad       Replies:11       Published on:2019-07-01

Legends: ZTE engineer:Administrator
Subject:  ZTE C320 q-in-q function
Common member
RTEdurad

Common member
Score::40
Registered on:2018-12-04
ZTE C320 q-in-q function (Published on:7/1/2019 8:29:03 PM)

hi

have a c320 olt 

from my mikrotik router i want to send to olt double vlan tagged packets (q-in-q), but it isn't work

can you give a link to q-in-q configurung manual?

or how i can change uplink gei_1/4/1 vlan tpid to 0x88a8 (802.1ad standart)?

thank you





Common member
RTEdurad

Common member
Score::40
Registered on:2018-12-04
Reply:ZTE C320 q-in-q function (Published on:7/11/2019 10:26:17 PM)

i have find the soltion





Common member
RTEdurad

Common member
Score::40
Registered on:2018-12-04
Reply:ZTE C320 q-in-q function (Published on:7/11/2019 2:55:08 PM)

thnx for answer

but it not an actual qinq, it's a double tagged vlan [(802.1q)(802.1q)(data)] (ethertype 0x8100)

i need solution for these packets [(802.1ad)(802.1q)(data)] (ethertype 0x88a8)





Administrator
10047664

Administrator
Score::4307
Registered on:2009-07-14
Reply:ZTE C320 q-in-q function (Published on:7/11/2019 12:53:21 PM)

PC<untag Packets add tag 100>onu<>pon card<tag100 Packets add svlan 1000>C320<>uplink port/gei_1/4/1<Forwarding Packets with qinq vlan 100+1000>router(qinq)
 con t
 interface gei_1/4/1
 switchport vlan  1000  tad

interface gpon-onu_1/1/1:1
……
service-port 1 user-vlan 100 svlan 1000

pon-onu-mng gpon-onu_1/1/1:1
 vlan port eth_0/1 mode  tag vlan 100 priority 0  ----------onu lan 1 port  packages  tx to pc  untag

 vlan port eth_0/2 mode  transparent                 ----------onu lan 2 port  packages  tx to pc  with  tag  vlan 100



Common member
RTEdurad

Common member
Score::40
Registered on:2018-12-04
Reply:ZTE C320 q-in-q function (Published on:7/10/2019 8:53:59 PM)

it works, thank you

but I have one question too

from router to olt i cant recive q-in-q tagged packets

how works vlan-smart-qinq function? i was read the manual, but it is not help

router--[(802.1ad tag)(802.1q tag)(data)]----->c320(gei_1/4/1)------->onu

how can i recieve 802.1q vid data on onu on topology like a scheme?





Administrator
10047664

Administrator
Score::4307
Registered on:2009-07-14
Reply:ZTE C320 q-in-q function (Published on:7/10/2019 1:54:32 PM)

Both inner and outer TPID configurations are supported. There can be only one inner TPID, and the default value is 0x8100. There can be four outer TPIDs at most, and 0x8100 must be configured.

The following example shows how to set the global outer TPID to 0x8100,0x9100 and inner TPID to 0x8100:

ZXAN(config)#tpid outer 0x8100,0x9100 inner 0x8100

ZXAN(config)#interface gei_1/19/4

ZXAN(config-if[gei_1/19/2])#switchport tpid port

ZXAN(config-if[gei_1/19/2])#switchport tpid 0x9100

ZXAN(config-if[gei_1/19/2])#show vlan port gei_1/19/2
PortMode      Pvid  CPvid Tpid/mode   TLSStatus TLSVlan  ProtEn   PrioEn
-------------------------------------------------------------------------
hybrid>=0     500   500   0x9100/PORT disable   0        disable  disable





Common member
RTEdurad

Common member
Score::40
Registered on:2018-12-04
Reply:ZTE C320 q-in-q function (Published on:7/9/2019 2:55:22 PM)

dear Administrator

thanx for your answer

try to make as you tell but system again gives error

ZTE09(config)#vlan 101
ZTE09(config-vlan101)#tp
ZTE09(config-vlan101)#tpid 0x88a8
%Code 60740: MsVlan: Port TPID not in global TPID list.
ZTE09(config-vlan101)#tpid 0x9100
%Code 60740: MsVlan: Port TPID not in global TPID list.
ZTE09(config-vlan101)#





Administrator
10047664

Administrator
Score::4307
Registered on:2009-07-14
Reply:ZTE C320 q-in-q function (Published on:7/9/2019 2:13:42 PM)

ZXAN(config)#vlan 100
ZXAN(config-vlan100)#tpid 0x9100

ZXAN(config)#interface gei_1/19/4

ZXAN(config-if)#switchport tpid vlan

ZXAN(config-if)#switchport vlan 100 tag





Common member
RTEdurad

Common member
Score::40
Registered on:2018-12-04
Reply:ZTE C320 q-in-q function (Published on:7/8/2019 9:28:59 PM)

dear Administrator


i cant change uplink tpid mode 

system gives error (%Code 60740: MsVlan: Port TPID not in global TPID list.)

i cant find any place to add 0x88a8 tpid to global tpid list

how i can change it?





Administrator
10047664

Administrator
Score::4307
Registered on:2009-07-14
Reply:ZTE C320 q-in-q function (Published on:7/3/2019 8:43:33 AM)

PC<untag Packets add tag 100>onu<>pon card<tag100 Packets add svlan 1000>C320<>uplink port/gei_1/4/1<Forwarding Packets with qinq vlan 100+1000>router(qinq)
 con t
 interface gei_1/4/1
 switchport vlan  1000  tad

interface gpon-onu_1/1/1:1
……
service-port 1 user-vlan 100 svlan 1000

pon-onu-mng gpon-onu_1/1/1:1
 vlan port eth_0/1 mode  tag vlan 100 priority 0





Common member
RTEdurad

Common member
Score::40
Registered on:2018-12-04
Reply:ZTE C320 q-in-q function (Published on:7/4/2019 12:15:17 AM)

thnx for answer

but i want recieve qinq with svlan on uplink gei_1/4/1 with tpid 0x88a8 from my router (i can't add an attachment, website gives error)






Total: 11 Records Page: 1 /2 First Prev Next Last    Records /Page(s)  
 
Subject:  ZTE C320 q-in-q function
 Attachment  
 Reply Content