Hi,
Where can be a problem, i cannot set XGE/GE port on SMXA/3 card to work as 10000 speed. Port only working 1000 speed.
I try force speed to 10000 but olt gives error:
ZXA10(config)#interface gei_1/3/2
ZXA10(config-if)#
ZXA10(config-if)#no negotiation auto
ZXA10(config-if)#speed 10000
%Code 67965: MsPort:this port doesn't support to configure this speed.
Why xge/ge port do not support 10000 speed rate?
Port is connected to good 10G NIC INTEL X520
When i connectet to 1G NIC ports working.
SFP+ zte mtrs 1e31-01
XGE/GE is only 1G port?
Maybe i need some command to activate or covert port to XGE (10G).
Thanks for answer!